LowBetter lighting and more gain by cavity, avoid texture noise

· Endoscope Mainboard

LowBetter lighting and more gain by cavity, avoid texture noise

Increasing the gain significantly will turn textures into noise. First, improve lighting and exposure, and apply mild noise reduction.。

Background and objectives

The high-quality High gains look bright but not usable when the lens is not enough. A comparison is made before the volume or the insurance: the same route, the same scene, the old version and the new version. The hyperbole stops and does not release it on the basis of the "senses of the same" basis. The list lists the examiner, date, version and sample/Video path; the playback, the number of the number, is able to be matched, and the signature is done.「Endoscope Low-Light Illumination Priority」It is more reliable to write it as a checklist: preconditions, operating procedures, acceptance criteria, and the location where evidence is stored. Following the checklist for after-sales service is less cumbersome than repeated verbal training. When performing on-site verification, record the device number, software package number, and the illuminance or vehicle speed/pedestrian flow at the time, and capture a video segment of no less than 8 seconds.。

Key Points for Implementation

Lighting and exposure first, and keeping track of motion drags. The most subtle use of the textures below distance is still clear. The division of labour is written at the time of the interface: the integrated operator is responsible for the installation of the Joint Investment, and the internal viewer's master side provides the baseline package and the qualified evidence. The terminology is uniform, avoiding the two sides speaking separately. It is recommended that the receiving material be assembled: a sample or short Video, the current parameter or the marked version number, the checker's signature, date. The missing item is not the end of the round. If the item changes, press「Endoscope Low-Light Illumination Priority」The original path is re-measured, and the new and old results are saved side by side for easy reconciliation in the future.。

Acceptance Recommendations

The record is the darkest distance. Sampling insulation is determined by using a single Sampling insulation of not less than 21% of each batch. The evidence must be re-executed after the non-qualified return to work, the old DOCUMENT is kept in contrast and direct coverage is prohibited.「Endoscope Low-Light Illumination Priority」Related closed loop; after the pilot is approved, it will be expanded to all locations or the entire fleet. Most rework cases are not due to algorithms suddenly deteriorating overnight, but rather because bracket tolerances, module batches, or configurations were rolled back without anyone taking note. When encountering「Endoscope Low-Light Illumination Priority」The complaint is repeated by the same path and the parameters are moved. Before signing, the Confilm evidence is open, the version number is correct, avoiding leaving only oral conclusions. The acceptance form contains the most implicit distance.「Endoscope Low-Light Illumination Priority」CategoryThe next item is checked directly. Hardware batches, drive, ISP/painting packages, and any change in the platform configuration are checked. No copy of the log is checked, and do not enter the client site.「Endoscope Low-Light Illumination Priority」When you write about the phenomenon, you'll have to tell me: what light/speed/flow of the items, how long it takes to take a photo or video of Video. The internal viewer's verbal agreement that it's easy to change the course. When the same problem arises again, you can transfer it out of the last one.「Endoscope Low-Light Illumination Priority」as a reference, and then decide whether to change the parameters。

Need assistance in selecting?

Description of scene and interface, Endoscope Mainboard can help the platform match the Joint Investment Project。

← Back to News List